New Equipment | Education/Training
Solder Training and Solder Certification Courses Taught in Accordance With IPC Soldering Guidelines. We offer a variety of customized courses set up specifically for our customers requirements. An example would be our combination type certificate t
ACI Technologies employs personnel that are Master IPC Trainers and Certified IPC Trainers for all IPC inspection standards. Visual Inspection Services ACI Technologies employs personnel that are Master IPC Trainers and Certified IPC Trainers for a
Electronics Forum | Sat Oct 06 05:33:47 EDT 2001 | spchua
I had recently encounter the "black and grey" pads problems for the BGA pad after the convection re-flow. The pads shows in in "black and grey" color and a litter solder in it, and it happen in ramdom, when applied heat and solder on the "black and g
Electronics Forum | Sat Oct 06 08:42:21 EDT 2001 | davef
Please give us additional background on your board, solder, process, etc. If you are talking about black pad in ENIG solderability preservative, check the fine SMTnet archives to get started.
Industry News | 2023-11-13 12:28:17.0
MIRTEC announces the development of groundbreaking inspection technologies that it will unveil at productronica 2023, scheduled to take place Nov. 14-17 at the Messe München in Munich, Germany. The new systems address critical challenges in 3D inspection performance of solder joints, inspection speed for tall component inspections, and measurement range limitations, offering manufacturers the perfect solution for enhanced quality and productivity.
Industry News | 2015-05-07 19:28:29.0
MIRTEC announce a new strategic cooperation that will empower yield improvement in the electronics manufacturing industry.
}D71]_O{%KVVP.png)
Parts & Supplies | Assembly Accessories
5322 358 10162 BELT KH2-M1727-10X 1 5322 358 10212 BELT, PULLEY MOTOR KH2-M9110-10X 2 5322 358 10275 BELT, R-MOTOR KV7-M8145-00X 11 5322 358 10277 BELT (330-3GT-9) KV7-M9146-00X 4 5322 358 10279 BELT KV7-M921A-01X 1 5322 358 10281 BELT KV7-M
Parts & Supplies | Assembly Accessories
5322 358 10162 BELT KH2-M1727-10X 1 5322 358 10212 BELT, PULLEY MOTOR KH2-M9110-10X 2 5322 358 10275 BELT, R-MOTOR KV7-M8145-00X 11 5322 358 10277 BELT (330-3GT-9) KV7-M9146-00X 4 5322 358 10279 BELT KV7-M921A-01X 1 5322 358 10281 BELT KV7-M
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2019-06-07 14:49:54.0
ACI Technologies was contacted in regards to poor solder joint reliability. The customer submitted an assembly that was exhibiting intermittent opens at multiple locations on a ball grid array (BGA) component. The assembly’s functionality did not survive international shipping, essentially shock and vibration failures, immediately making the quality of the solder joints suspect. The customer was asked about the contract manufacturer and the reflow oven profile as well as the solder paste and surface finish used. The ACI engineering staff evaluated the contract manufacturer’s technique and determined that they were competent in the methods they used for placing thermocouples in the proper locations and developing the reflow oven profile. The surface finish was unusual, but not unheard of, in that it was hard gold over hard nickel, rather than electroless nickel immersion gold (ENIG). The customer was able to supply boundary scan testing data which showed a diagonal row of troublesome BGA pins.
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
http://yincae.com/index.html YINCAE SMT 256 Dipping Process YINCAE SMT 266 Jetting Process
Training Courses | | | PCB Inspection Courses
The PCB inspection courses focus on improving PCB yield and reliability through validation and detection of defects on electronics assemblies.
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Tue May 17 00:00:00 EDT 2022 - Thu May 19 00:00:00 EDT 2022 | Amsterdam, Netherlands
Electronics in Harsh Environments Conference and Exhibition
Events Calendar | Tue May 17 00:00:00 EDT 2022 - Thu May 19 00:00:00 EDT 2022 | Amsterdam, Netherlands
Electronics in Harsh Environments Conference and Exhibition
The Future of Solder Joint Encapsulant Online Version SMTnet Express, January 14, 2016, Subscribers: 23,987, Members: Companies: 14,894, Users: 39,724 The Future of Solder Joint Encapsulant Dr. Mary Liu and Dr. Wusheng Yin; YINCAE Advanced
SMT Express, Volume 2, Issue No. 3 - from SMTnet.com Volume 2, Issue No. 3 Thursday, March 16, 2000 Featured Article Return to Front Page Curtailing Voids in Fine Pitch Ball Grid Array Solder Joints by Gary Morrison and Kevin Lyne
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/RSS_library-expert-lite-pads-and-solder-joints_topic1873.xml
PCB Libraries Forum : Library Expert Lite Pads and Solder Joints PCB Libraries Forum : Library Expert Lite Pads and Solder Joints This is an XML content feed of
| http://etasmt.com/cc?ID=te_news_bulletin,19361&url=_print
Quality Requirements and Formation Process of Reflow Solder Joints-News-Reflow oven,SMT Reflow Soldering Oven-cmsadmin Reflow oven,SMT Reflow Soldering Oven 当前位置: Home >> News
